Best Bandsaw Under $1000

Last Updated on

Band saw serves as a vital equipment in the arsenal of both professional and DIY workers who wish to benefit out of greater versatility and flexibility.

It can help you make veneers, cut irregular shapes and even rip lumber into narrower strips to nail professional grade results within a short span of time.

The market is filled up with a large variety of band saw models making it difficult to pick the one which would serve you well.

This is why, we have done the hard research work at our end, to present you with five of the best band saw models which can be availed by shelling out less than 1000 dollars.

Things To Consider While Buying A Band Saw

Choosing the perfect band saw can be a difficult task. You can however gain a positive footing by developing a clear notion about these factors listed below:

  • You can choose between a new or refurbished saw depending upon your budget and your end expectation out of the same. A new saw can serve you well if you run a busy workshop with ample area of operation. Hobbyists on the other hand can work with a refurbished saw. However, if you have decided on buying a refurbished one, then you should purchase the same from a reputed manufacturer. Old saws often become redundant as they no longer meet the set safety standards. But a reputed supplier will toggle with the same for bringing it in sync with the current safety standards in the form of reliable guarding and braking systems.
  • Next you need to consider the cutting capacity of the band saw in terms of its throat and depth of cut. The distance between the upper blade guide and the table is denoted by depth of cut and determines the optimum depth of material which can be cut using the same. Cheaper saws having maximum depth of six inches can be extended till 12 inches whereas larger ones have a depth of 36 inches. Throat refers to the distance between the column and the cutting blade and determines the width of the cut which can be achieved with the saw. The throat of freestanding machines is wider in comparison to bench top varieties.
  • Benchtop machines usually have electric motors leading to moderate horsepower. You can subject these machines to occasional use. Freestanding machines on the other hand pack in more power along with variable speed motors. You can thus use these machines for exercising more precision while working on a variety of materials ranging from plastic to wood and even metal.
  • Rip fences and miter gauges are two of the most popular accessories required by all band saw operators. Rip fence as the name denotes help in the creation of precise rip cuts. Mitre gauge on the other hand helps in cutting at an angle ranging from 45° to -45°. The Biesemeyer Commercial T-square is an extremely popular variety of rip fence which can be adjusted and operated easily. You need to make sure that your band saw features both these accessories and carry a recognised guarantee.
  • While buying a band saw, you have to look for a variety of features and the list is endless. But some of the most popular ones which can benefit users are a large dust collection port for collecting waste material, tension controller for adjusting blade tension and a pulley wheel brake for preventing it from gliding once the device is turned off.

1. Grizzly G0555LX Deluxe Bandsaw, 14″

CHECK PRICE

If you are searching for a well-constructed band saw which shall remain permanently installed in your workshop, then the Grizzly G0555LX Deluxe Bandsaw can serve you pretty well.

This band saw stands out from its peers in the department of robustness and durability courtesy its powder coated body, strong cast iron frame and ball bearing construction. Such characteristics make the Grizzly band saw ideal for undertaking heavy duty tasks while making it look like a cakewalk.

The cast iron construction of its precision ground table brings in greater stability and sturdiness to this band saw. You will also find a strong extruded T shaped re-saw fence in this band saw which is manufactured using aluminium as well as a magnifying window and miter gauge.

The fence can be adjusted as per requirement. The Grizzly G0555LX is powered to the core by a 1 HP motor and its blades operate at the speed of 3100 FPM, making it ideal to work on a variety of materials.

Features:

  • Has table tilting capabilities of 10 degrees to the left and 45 degrees to the right.
  • The 4-inch dust port can be attached easily with a dust collection system.
  • You can carry out curve cutting, lumber ripping and cutting of irregular or odd shapes with its heavy duty stand and cast iron frame.

2. Rikon 10-305 Bandsaw With Fence, 10-Inch

CHECK PRICE

The Rikon 10-305 comes in as a pleasant surprise to users who feel that high quality band saw are only manufactured by reputable brands.

This powerhouse can serve you exceptionally well if you are on the lookout of solid results within a budget. The well designed bad saw can cater to both amateurs and professionals with its smooth and consistent performance.

You can undertake small to mid-sized projects with the Rikon 10-305 in a hassle-free manner. Its compact size comes in as a major breather is you are already suffering from a solid space crunch. You can even store it neatly once you are done using this band saw.

Weighing at just 68 pounds, the Rikon 10-305 can keep you completely buffered from having to worry about transportation around your work space.

The unit comes accompanied with a rip fence which is an extremely uncommon sighting in band saws falling under the same price category. The big size of its cast iron table paves the path for smooth operation by allowing ample room.

There is also an adjustable guidepost which helps to fine-tune the height within just seconds’ time courtesy its conveniently positioned handle. Lack of adequate height can lead to stability concerns which can also be tackled easily by screwing its base into a support piece.

You can tilt the table between 0 to 45 degrees for cutting at a specific angle precisely.

Features:

  • 1/3HP motor renders adequate power for pen blanks and cutting bowls.
  • Comes with a high-quality rip fence which can also be removed for engaging in free hand work.
  • Frame is constructed using steel plate making it comparatively stronger than the plastic frames which are used by other manufacturers.

3. WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10″

CHECK PRICE

This stationary band saw has been designed especially for metal fabricators, woodworkers as well as typical construction workers. However, it can also serve the needs of those working in timber cutting industry and the ones employed in steel mills.

This band saw stands out from its peers with a wide table surface which helps in operating on even the most irregularly shaped work pieces.

Whether you are cutting down industrial pallet racking, conduit or long rails on the roof, the WEN 3962 can help you largely with the same. This heavyweight 73 pounds’ unit can help you exercise maximum precision in work as it doesn’t wobble while you make the cuts.

You can exercise better control over the work done and that too without the cuts getting warped or skewed courtesy the strong stand.

The WEN 3962 band saw can strike the right balance between cost and performance by helping you create cuts which are 6 inches deep and 9¾ inches wide. Its 3-in-1 Dust Port can easily fit into a variety of dust collection hose with sizes varying between 1-3/4, 2-3/4 and 4 inches.

You can take your pick amongst its dual speed levels where the blades run at 1520 or 2620 feet per minute making it ideal for undertaking different types of projects.

Its 72-inch blades can also be used anywhere ranging between 1/8 to 1/2 of an inch depending on the complexities of work. The WEN 3962 band saw also allows the creation of bevel cuts from 0° to 45°by simply bevelling its 14-1/8 x 12-1/2-inch table.

Features:

  • User friendly design makes it ideal for being used by both amateurs and professionals.
  • Constructed using premium grade aluminium, steel and other metals which can easily stand the test of time.
  • Spacious worktable helps in working on bigger pieces of wood with optimum accuracy.
  • Built-in LED light helps working even in dimly lit environments.

4. DEWALT Portable Band Saw, Deep Cut, 10 Amp, 5-Inch (DWM120K)

CHECK PRICE

The DeWaltDWM120K is the foremost choice of carpenters and construction workers who are on the lookout for a tool which can guarantee them optimum sawing precision.

The kit is accompanied with two blades, a hex wrench and a case. It comes backed with a manufacturer warranty of 3 years, 90 days’ money back guarantee and a year’s free servicing which can give all potential buyers adequate peace of mind. The DeWaltDWM120K is accompanied with a hard case which helps in keeping the saw protected from physical corrosion while storage.

You can also store spare blades inside the case for being used readily at the work site. Although the manufacturers have listed its cutting capacity as 5”, you can easily squeeze it up to 6” according to the shape of the object you are cutting.

It comes with a built-in LED light helping users perceive the cut line even in the lack of adequate lighting. An integrated hang hook contributes to its longevity by hanging the saw easily without having to pull it up and down continuously. Rubber bumpers and serviceable steel shroud further help the saw’s guards to tackle jobsite abuse.

The DeWaltDWM120K is powered to the core by a 10-amp motor which is ideal for undertaking tough jobs. You can thus easily bank on this portable band saw to proceed with quick cuts and that too without getting bogged down.

Its variable speed dial helps in performing between 100 to 350 sfm making it ideal for selecting the perfect speed for different applications.

Features:

  • Blade alignment gets improved by accurate blade tracking adjustment which in turn adds up to its longevity.
  • Dual bearing blade guide rollersimpart greater durability.
  • Its oversized multi-position front handle paves the path for easy adjustments while offering plenty of hand space.
  • The saw’s well balanced body diminishes user fatigue while improving the comfort meter.

5. DEWALT 20V MAX Portable Band Saw, Tool Only (DCS371B)

CHECK PRICE

DeWalt has evolved into the go to brand for both amateur and professional users in search of power tools. This compact model is a part of DeWalt’s 20V Max battery platform making it compatible with more than 200 plus tools.

You can easily usher in massive savings by bringing home this band saw having a runtime which is 8 times more than that of standard batteries. The band saw has a solid cutting capacity of two and half inches making it one of the best choices in the department of compact models.

Its dual-bearing blade guide rollers impart greater durability to DCS371B with its holistic design. It can protect both the material and the blades for saving your money from having to spend on frequent maintenance works. You can thus channelize your hard-earned money for purchasing other necessary tools and products.

The DeWalt band saw comes with a LED light which can illuminate your workplace and help you carry out projects even in completely dark environments.

It even has an afterglow which can light up your surrounding for twenty seconds more even after being switched off.

Although this band saw lacks a lit line of sight, the same gets compensated by the quantum of light provided by the LED. You can store the DCS371B easily using its integrated hang hook once you have completed your work.

Features:

  • Superior balance stands guaranteed by its centered handle which diminishes user fatigue and allows for more accurate cuts.
  • User can hang the saw using it integrated hook and without damaging its base or front handle.
  • Back handle having ergonomic soft grip provides maximum flexibility and comfort.
  • Blade tracking adjustment helps in lengthening the lifespan of blade.
  • Very easy to alter the blade tension using the blade tracking wrench which can offer you complete control over different aspects of your work.

Conclusion

If you are running on a stringent budget, then these five band saw models listed out above can come in to your direct rescue. Just bring home any of these band saws and ease out your work load with its efficient operation. If you have any other band saw in mind which we haven’t mentioned in this list, then don’t forget to mention it in our comments section below.

Close